Brodit Active Holders Vs Passive Holders

Andy Simpson

Brodit are the leading manufacturer of in car cradles, making a wide range of holders that are specific to your phone to make sure that it’s held securely in place in your car. You’ll notice from the product listings that there are two types available – Active and Passive, and that there are a couple of mounting options too. This quick guide will explain the difference between the different types of Brodit Holder.

Passive Holders:
Passive Holders are a standard straight forward holder for your phone. They are moulded to the shape of your handset and are secured to your car using the self adhesive pads or by screwing into your dashboard.

Active Holders:
Active Holders are the same as the Passive Holders, but include a car charger or have one built in. The charger type will vary by phone, but the holder will generally have a moulding to hold the charging tip in place. On most phones you can simply slide your phone into the cradle and the charger should connect straight away, others may need you to manually insert the charging tip into the phone (normally where the charging port is on the side).

Tilt Swivel:
Tilt swivel refers to the type of mounting plate fitted to the holder. Brodit holders without the Tilt Swivel will sit flat against the dashboard/ProClip and is not adjustable, so once its in place, its not moving. Tilt Swivel devices give you more flexibilty on how the phone is positioned in the car. They can be rotated through 360 degrees and can be adjusted in all directions to improve visibility and to reduce reflections from bright light. Tilt Swivel mounts are ideal if your phone has a landscape view and is used for Sat Nav & Media playback.

Mobile Phone holders get handled a lot and can become loose over time, especially if they are mounted with the adhesive pads. Although the adhesive pads are quite strong, we’d recommend using a screw fixing to reduce the risk of it falling off your dashboard. If you don’t want to screw into your dashboard, you can purchase a Brodit ProClip.

ProClips:
Brodit ProClips are special brackets that are designed to attach to your dashboard without the need for drilling holes. They normally clip into your dashboard between fascia panels or sit at the side of your stereo. ProClips provide a flat solid surface for you to screw your car holder to and are available for almost all vehicles. We stock a wide range of Brodit ProClips, but if your vehicle isn’t listed, please request it and we’ll order one in for you.