Hybrid technology ensures maximum protection against damage
The Trident Cyclops case features a hybrid construction of durable, hardened polycarbonate and shock-absorbing TPE. The shock-absorbing Thermo Plastic Elastomer (TPE) absorbs impacts and protects your device from drops and knocks. The hardened polycarbonate outer-shell is tough and stylish, resisting scratches and complementing the sleek design of the Huawei Ascend Mate 2.
Provides additional bump and shock protection
The exposed TPE corners dissipate impact away from the device for additional bump and shock protection and the smooth outer layer allows the case to easily slide into your pocket or purse. All buttons are fully functional through the case and the audio jack and USB port are accessible through TPE plugs.
Military tested to meet or exceed MIL-STD-810F rating
The Trident Cyclops is the thinnest case designed and tested to Military Standard MIL-STD-810 requirements (vibration, dust, sand, rain and drop), so you can be sure that your Huawei Ascend Mate 2 is comprehensively protected without adding unnecessary bulk.
All ports and features are fully accessible and protected with plugs
The Trident Cyclops allows access to all the buttons on the phone through the built-in rubber buttons and has cut-outs for the flash, camera, loudspeaker, microphone and noise cancelling microphone. Power ports and audio jacks are covered with TPE, keeping out dust, dirt and debris.
Trident logo on back of case
The slightly raised Trident logo on the back of this case not only adds a unique look to your phone but also serves as a grip for when you are using your phone on a desk or table, ensuring it doesn't slide around on flat surfaces.
Includes a built-in screen protector for comprehensive protection of your screen
For ultimate protection, this case comes complete with a built-in Trident screen protector to ensure that your screen will never get marked or scratched.
Military Standard Test Results (MIL-STD-810F):
Vibration (Mil-STD-810F, Method 514.5): 20-2000Hz across 3 different axis for a total of 18 hours.
Dust (Mil-STD-810F, Method 510.4): Blow dust for 3 hours at 29 ft / sec.
Sand (Mil-STD-810F, Method 510.4): Blow sand for 3 hours at 59 ft / sec.
Rain (Mil-STD-810F, Method 506.4): 7.9 inches per hour of rain at 40 mph wind velocity for 1 hour.
Drop (Mil-STD-810F, Method 516.5): 26 drops onto concrete from 4ft.