In-car 15W wireless charging

The Peak Design Car Mount is made from beautiful machined/anodized aluminium and mounts directly to your dashboard or console via an ultra-strong, ultra-durable, weatherproof 3M VHB adhesive pad. Designed for quick and intuitive wireless charging, the Peak Design MagSafe wireless charging car mount allows you to charge your phone without the mess of charging cables. The wireless car charger uses MagSafe technology to charge your device quickly - just place your phone on the mount and watch as it begins charging without having to connect any wires to the phone.

MagSafe SlimLink™ attachment technology

The Peak Design MagSafe Wireless Charger Car Mount features built-in magnetic attachment technology called SlimLink™. It is ultra-secure and feels like magic - allowing you to use the mount with MagSafe devices and cases. The secure attachment ensures that your phone is safely mounted through all the bumps and turns in the road. Want to make the most of this charger but don't have a MagSafe-compatible device? Don't worry! Just attach one of these MagSafe Converter Rings to your case and start charging.

Perfect viewing angle: use your phone in portrait or landscape mode

The Peak Design MagSafe wireless charger and car mount rotate using a high-quality ball joint, so it is easy to adjust the angle of the mount for the perfect view. Plus, it allows you to flip between portrait and landscape orientation with just one hand. Set your playlist in portrait and flip to landscape to use your navigation app.

Seamless, one-handed magnetic mounting experience

The Peak Design charger has been designed with ease of use in mind. You can mount and secure your phone on the car mount with just one hand in a matter of seconds, so you do not have to spend a long period of time trying to attach your device to your holder.

Easy installation

First, ensure that the temperature in your car is 16–27°C for good adhesion to the dashboard. Use an alcohol wipe to clean the surface before applying the mount and wait about 5 minutes for it to dry. Remove the film from the mount and press the mount firmly into the dashboard for 30 seconds, applying good pressure to the base plate. Install your 12V power adapter into your car's power port and then plug the USB-C cable into the adapter and mount. The included cable clips can be used to tidy up the cable. Finally, wait 24 hours before using the mount to allow the adhesive to reach full strength.

Safe removal

The Peak Design MagSafe Wireless Charger Car Mount can be safely removed without damaging surfaces or leaving residue in most instances. Heat the adhesive slightly either by running the car engine or using a hairdryer - then hold dental floss between the adhesive pad and dashboard, and pull the floss in a sawing motion to break the adhesive bond. If there is remaining residue, roll it off with your finger or remove it with blue painter's tape/a gentle cleaner. A 2nd adhesive pad is included for remounting/repositioning.

Please Note: For best results use without a case or with MagSafe cases only.

Your device will need wireless charging capabilities to use this charger, if your device is not wireless charging enabled a wireless charging adapter will be required.

Technical specification:

DIMENSIONS

Head: 5.8cm x 5.8cm x 1.2cm (2.3" x 2.3" x 0.5")
Total Height (from dashboard): 4.5cm (varies depending on ballhead position)
Base Pad: 3cm x 5cm (1.2" x 2.0")

WEIGHT

95.4g (3.4oz)
Including charging hardware: 133.5g (4.7oz)

CERTIFICATIONS

RoHS Compliant
FCC ID: 2A294MCMAA
IC: 27367-MCMA