Most Useful Customer Reviews
Samsung Galaxy S5
9th July 2014
Simple & effective.
Having just installed a wireless charger in my phone, I am setting up systems to work with it.
This unit is perfect for my desk at work - it's at the right angle to see easily by my laptop, although it is difficult to swipe the fingerprint sensor to unlock the screen when the bottom edge is on, or just above, the desk. However with power going in whilst on the stand, I would just leave the screen on. It's neat and unobtrusive but weighs enough (140g - about as much as a full pot of youghurt) to be very stable. It has a non-slip ring on the top surface to prevent the phone slipping - it works fine, even with my phone's silicon case.
The charger works off both mains and USB output (charger & USB cable supplied, but see below). I checked it charging via USB from my laptop. The phone started at 90% and took ~40mins to reach 100%, i.e. charging at about 1% every 4 mins (I graphed it and it was pretty linear through this range). N.B. I had set the display to stay on throughout; presumably it would have been quicker with the display off, but I wanted to check that the charge power was enough to keep it on AND charging. It was!
It's not the cheapest stand or charger, but it's stylish, unobtrusive, simple and effective.
Read 9 customer reviews
26th June 2014
Brilliant - charges through my case - just make sure you place the phone in the centre & the light turns green. Great value.
Write a review
- Wireless charge capacity
- Sleek design
- Angled surface to maximise phone visibility while charging
- No supplementary bulky accessories required
Wireless charge capacity
This stylish QI inductive charger allows you to effectively charge your smartphone without wires.
The sleek design of the QI charging orb allows it to work with any décor, especially in one of the four colours - you're bound to find one that suits your style.
Angled surface to maximise phone visibility while charging
The non-slip technologies used with the QI charging orb allow you to place your phone on the angled surface of the orb without it slipping off, maximising the visibility of your phone's screen during charge time.
No supplementary bulky accessories required
The wireless nature of the charging orb means there are no bulky extra accessories required, so you can charge your device hassle-free!
*PLEASE NOTE: If your phone isn't QI enabled, you will require a QI case or charging adapter
Dimensions: 76mm x 56mm
DC input: 5Vdc/1.8A
DC output: 5Vdc/1.0A
Charging Time: Approx. 4 hours
- Charger Type: Desktop Charger
- Colour: Black
- Part No: W-ORB-BK