The Parrot MKi9000 features an external double microphone and new software which eliminates environmental and in-car noises with full-duplex and zero-echo crystal clear conversations. It includes an independent RF remote control which enables you to take complete control at the touch of a button. The MKi system is supplied with a music cable which enables you to connect your music player via USB or using a 3.5mm cable. The MKi9000 also supports streaming music over Bluetooth from any A2DP enabled device.
Order the Parrot MKi9000.

The Parrot MKi9100 has the same specifications as the MKi9000, but with the addition of a blue OLED display screen that lets you see the callers name and number when receiving a call. When you connect your music player to the MKi9100 using USB or Bluetooth and the MKi9100 will display the track title and artist on the screen. The Display screen can be removed easily for added security.
Order the Parrot MKi9100.

The Parrot MKi9200 supports all the features on the MKi9000, with the addition of a 2.4 inch colour screen. With the colour screen you can assign photos to contacts, set a background wallpaper, see playlists and album covers. The display screen also has a built in SDHC Memory Card reader, supporting memory cards upto 32GB – completely eliminating the need for a seperate music player. Simply store all the music you want on your memory card, and play it directly from the MKi9200.
Order the Parrot MKi9200.

If you’re looking at getting a car kit, don’t forget to check out our guide on Car Kit accessories.

Turn your phone off!
It may sound silly, but how many times do you turn your phone off when you go to bed at night? Chances are you’ve not had many phone calls in the middle of the night, so by turning your phone off when you go to bed, and back on again in the morning, you’re saving 8 hours a day of battery life and could extend your battery life by a few days.

Turn off Bluetooth.
Bluetooth only needs to be turned on when you need it – by leaving it turned on all day your phone is constantly looking for other Bluetooth devices and draining your battery.

Turn off GPRS, 3G & WiFi.
If you never use the internet on your mobile, you won’t notice any difference by turning GPRS and 3G off – other than having to charge your phone less! If you do use Internet on your phone through either 3G or WiFi, turn them on as and when you need them, other wise they’ll be consuming power searching for networks when there is no need.

Adjust the display.
Manufacturers normally set the screen to its brightest setting to make it look clearer. This only drains power, adjust the settings and dim the screen to a level that you can still see, but is no brighter than it needs to be. Change the screen saver settings too, set it to come on sooner – reducing the time the screen is lit up for.

Leave it alone!
We’re all guilty of it, we get bored, nervous, need to look busy, so we pick up our phones and start fiddling with them. We’re not doing anything on them, only draining the battery. Put it down and find something else to play with!

The innovative W902 Walkman phone has the highest specifications of the 3, featuring a 5 megapixel camera with flash, image stabiliser and Auto Focus. The W902 includes an 8GB Memory Stick Micro which lets you store more than 8000 songs. The much improved camera allows for better video capture than on previous Walkman models and allows you to geo-tag your photo’s using information from your network provider. The W902 features the same clear audio technology as the W980 which gives exceptional audio quality when using the HPM-77 premium headphones which are included with the phone. The W902 measures 110 x 49 x 11.7 mm and has a 2.2" scratch proof screen. Other features include Bluetooth, FM Radio, Picture and Video Blogging, Email, Auto rotate and HSDPA.

The W595 Walkman phone is designed around sharing. It has a 2.2 inch screen, 3.2 megapixel camera and comes with a 2GB memory card that will hold around 2000 songs. The phone has an unusual "share jack" that lets two people listen to the same music using an additional headset. The phone also has the now familiar SensMe and Shake controls, that allow you to select music depending on your mood, skip tracks or adjust the volume simply by shaking the phone. The W595 is also a gaming handset, with four games included including Guitar Rock Tour in 3D.

The W302 Walkman phone is more of a budget Walkman phone, although the specification of the phone is far from budget. At jsut 10.5 mm thin, this slim handset is the perfect way of keeping your music photos and contacts all in one place. The phone includes a 512 MB memory stick micro to store upto 480 songs, has an FM Radio and features Track ID, a music recognition services that allows you to identify music. Its built in 2 megapixel camera lets you capture the moment and post it straight to your blog, send via MMS or email to friends.

All three handsets are due for release in quarter 4 2008.

Windows XP Service Pack 2 has generic Bluetooth drivers built into the operating system. While these drivers will provide you with basic Bluetooth functionality, you will only get the most out of your Dongle by installing the drivers that are supplied with it.

Installing generic Windows drivers:

Before beginning installation we would recommend that you visit the Microsoft Windows Update web site, to make sure your PC is up to date with the latest driver and security updates. Bluetooth drivers are built into Windows XP Service Pack 2 so an installation CD is not necessarily required.
To begin installation, insert the Bluetooth Dongle to a free USB port on your computer.

After a few seconds, you should see a yellow notification bubble by the clock. Windows will automatically begin to search for the necessary drivers and after a few minutes, the hardware will be installed and ready for use.

If Windows doesn’t have the necessary drivers, the add new hardware wizard will prompt you to insert the disc.

If this happens;

• Place the disk into the CD drive.
• Click next.
• Follow the on screen prompts to install the drivers.
• Restart the computer.

Your new Bluetooth Dongle is ready for use.

Installing specific drivers using supplied disc:
To install the drivers that are supplied with your new Dongle, follow these steps.

It is very important that you do not plug the Dongle into your computer until prompted to do so.

• Insert the CD into your CD drive.
• Disc should run automatically.
• Follow the on screen prompts.
• Insert the Dongle when prompted.

A series of yellow notification bubbles will appear by the clock as the drivers are installed. When installation is complete you will get a notification to say that the hardware has been successfully installed and is ready for use.

Installing Specific Drivers using downloaded drivers:
If you don’t have the software disc anymore or it has been damaged, you can download the drivers from the internet. The drivers needed vary from device to device. Download Bluetooth Dongle drivers. Once you have downloaded the file. Double click the Icon to begin the setup process. Follow the on screen prompts, and only insert the Dongle when prompted to do so. A series of yellow notification bubbles will appear by the clock as the drivers are installed. When installation is complete you will get a notification to say that the hardware has been successfully installed and is ready for use.

On some handsets, users may find that although they can make and receive calls perfectly fine, they may not be able to hear music in stereo if at all. In order to resolve this there are 2 possible fixes:

Fix 1: Hard reset of BT320

• Delete the pairing from your phone. If you are not sure how to do this, please consult your phones user manual.
• Turn off the headset.
• Plug the charger into the headset 3 times, keeping it plugged in for 4 seconds each time before unplugging it.
• Pair the headset to your phone.

Fix 2: Software Update
If the Hard reset hasn’t solved your problem you may need to update the software in your headset. The cable required to update the headset is not included with the headset and is not currently available from Mobile Fun. The cable is the same as a Sony DSC-S650 Digital Camera.

• Download and install the Jabra Software Update Tool.
• Follow any on screen prompts.
• When the update is finished, pair the headset to your phone.

It is extremely important that you do not turn off your computer or unplug the headset during the update process as this could cause irreversible damage to your headset. Mobile Fun will not accept any responsibility for any damage caused to your headset during a software upgrade.

Windows Mobile 5.0

• To start the set up, launch the "Bluetooth Manager" on your device. To do this tap Settings > Connections > Bluetooth on the start menu
• On the Bluetooth options screen you need to turn on bluetooth and make sure that your device is discoverable.
• Click on the devices tab at the bottom of the screen and then select new partnership. Your device will now search for your GPS receiver.
• Once the search has completed, select the GPS device you wish to use, You will then be prompted to enter the passkey. This is usually 0000, but varies from device to device, so keep your instruction manual for your GPS receiver close to hand.
• The next screen will ask you to select the services you wish to use with this device.
• Tick the box next to serial port and then click on finish.
• Now click on the "com ports" tab at the bottom of the screen, you will have two options here, new incoming port and new outgoing port. You need to select new outgoing port.
• On the next screen you will need to select the GPS device that you have just added and press next.
• You now need to choose a com port from the drop down list and press finish. Make a note of the com port number that you have assigned to the GPS receiver as you may need this later on in the set up process.

Your GPS is now set up to talk to your handheld device. You may need to change a few more settings depending on the software you are using. If you are unsure consult your user guide.

Tom Tom Navigator

To use TomTom Navigator you will need to tell the software which GPS receiver to use.

• Launch the application and then go to the preferences screen. Click on the Show GPS Status screen.
• Click on configure and scroll through to select "Other Bluetooth GPS", this brings up a list of all the available connections on your device.
• You need to select the com port you assigned to the GPS receiver earlier on in the set up process. If you can’t see the full name of the port, tap and hold the name to reveal it.
• You will know that your GPS is correctly configured when you see the UTC time in the top right corner and you get a black and yellow spinning icon.

If for any reason the icon isn’t spinning and you can’t pick up a GPS signal, there is an alternative set up option you can try:

• Click again on the configure button, and this time scroll through and select "Other Cable NMEA GPS" (Don’t worry about the name, we’ll tell it to use Bluetooth later on)
• Select the baud rate, if you are unsure set the rate to 4800.
• You should now see the same list of available ports that we saw earlier on. Select the appropriate one for your GPS receiver, remember you can tap and hold the name of the port to see its name in full.
• You should now see the yellow and black icon spinning on the screen.

If this still hasn’t worked then you may need to contact TomTom technical support for more advanced help.

The steps below assume that you have installed the software that came on the CD with your Bluetooth Dongle, not the generic Windows drivers, and that Skype is already installed on your PC running Windows XP SP2.

To determine which Bluetooth drivers you are using, you will need to access Device Manager. To do this, press the "Windows" and "Pause Break" keys on the keypad simultaneously. This will then open System Properties. Click on the Hardware tab, and then you will see a button to launch Device Manager – click it. This will then open a new window listing all devices connected to your computer. Towards the top of this list you will see Bluetooth Devices, click the plus sign to expand the list. The top line should say Bluetooth Enumerator, the second line will tell you which driver you are using and will be either Broadcom/Widcomm, Toshiba, or BlueSoleil. Make a note of your driver manufacturer and close all windows. If you see Microsoft listed, it means you have the generic Windows drivers installed, and probably won’t work with Skype unless you update the drivers. For information on how to do this, read our post on updating your Bluetooth drivers.

Please note that drivers are specific to the dongle you are using, and you can only use the driver manufacturer that is supplied with your dongle. You cannot, for example, use a Toshiba driver with a BlueSoleil supported dongle.

Broadcom / Widcomm – Skype Compatibility Rating 5/5

• If you have already paired your headset with your PC, delete the pairing.
• Right click the Bluetooth icon by the clock and select add a bluetooth device. This will then launch a wizard to guide you through the pairing process.
• The wizard will search for available devices, select the headset you want to use and click on next.
• The next screen will ask you to confirm the services you want to use. Mono Bluetooth Headsets will list only Hands-Free Unit, Stereo Bluetooth Headsets will also list Stereo Audio.
• Ensure all boxes are ticked and then click next.
• Click OK on the pop up and then click finish on the confirmation screen. You may then see a further pop up confirmation message. Click ok.
• The next screen will ask you to confirm the type of headset. Regardless of your headset, select personal handsfree device with no display.
• You will then be asked to confirm what applications the headset will primarily be used for. Make sure Skype is ticked – click next,
• Now switch over to Skype, you should see a pop up alert by the clock asking you to allow a program to access Skype, you need to allow this add on.
• Once you’ve allowed it you’ll see a message at top of the Skype window.
• Click on the BTSTAC~1.exe file name, then on the pop up screen make sure that the check box next to "allow this program to access Skype" is ticked,
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth".
• Check the "Ring PC Speaker" box if you want incoming calls to ring through the PC speakers as well as ring in the Bluetooth Headset then click on save,
• Make a test call. There may be a brief delay when it connects initially, but you should then be able to hear and talk through your Bluetooth headset.

Toshiba Drivers – Skype Compatibility Rating 4/5

• If you have already paired your headset with your PC, delete the pairing. You can do this through the Toshiba Bluetooth Control panel.
• You’ll see the name of your Bluetooth headset, and three buttons underneath – new connection, detail and delete. Make sure the headset is disconnected and then click delete.
• Launch Skype.
• Go back to your Bluetooth control panel and click on new connection.
• On the wizard that appears, you need to select CUSTOM mode.
• Turn your headset on and put it into pairing mode then press next. Your PC will then search for Bluetooth devices in range, if it doesn’t find your headset on the first scan, click refresh to do another search.
• Select your headset from the list of discovered devices and click next.
• On the next screen you may be prompted to select the type of device you wish to connect. You should see two or three options – Audio Sink, Handsfree, Headset. (Audio Sink may only show up if you are using a stereo headset.)
  You need to select Handsfree on this screen and click next.
• You will now be prompted to enter Pin or Passkey, this can be found in your user guide.
• The next screen you see should ask you if you want to use this in cooperation with a VOIP application. You need to make sure that this box is ticked. If its not, you won’t be able to use it with Skype.
• On the final screen you will be given the option to rename your headset and place a shortcut to the connection on the desktop.
• Click finish.
• Now switch over to Skype, you should see a pop up alert by the clock asking you to allow a program to access Skype, you need to allow this add on.
• Once you’ve confirmed it you’ll see a brief confirmation message in the main Skype window.
• Click on this message and make sure that the check box next to "allow this program to access Skype" is ticked.
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth wave" – Click on save.
• Make a test call. There may be a brief delay when it connects initially, but you should then be able to hear and talk through your Bluetooth headset.

BlueSoleil – Skype Compatibility Rating 2/5

BlueSoleil drivers aren’t the best for working with Skype. The latest version of the drivers, 5.0.5, doesn’t support VOIP services such as Skype unless you pay for an upgrade. You can download version 3.2.2.8 from the BlueSoleil web site which does support VOIP at no extra cost, but I found it to be more difficult to use than Toshiba and Broadcom. The following guide is based on Software version 3.2.2.8.

• Pair your Bluetooth Headset to your PC as normal and then launch Skype.
• To begin setting up Skype, click on Start -> All Programs -> IVT BlueSoleil -> BlueSoleil VOIP Plug In.
• After a few seconds you should see a pop up notification by the clock asking to allow access to Skype, you need to allow this add on.
• Once you’ve clicked on it you’ll see a message at top of the Skype window.
• Click on the .exe file name.
• On the pop up screen make sure that the check box next to "allow this program to access Skype" is ticked.
• Connect to headset, (either by pressing call button on headset, or by right clicking on the headset icon in the bluetooth control panel and selecting connect.)
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth SCO" – Click on save.
• In some cases, "Bluetooth SCO" may not work, in which case set these to Bluetooth AV.
• Make a test call. BlueSoleil is a little slow, and you will find that your call initially is played through your PC, but will be transferred to the headset after a few seconds.

Elan Intelli-Mutes

Elan Intelli-Mutes: What are they and why do I need one?

The Intelli-Mute from Elan is designed to install your Car Kit quickly and hassle free. Instead of hardwiring your Car Kit into the vehicle’s power supply, the Intelli-Mute allows your Car Kit to be powered using your car stereo. All call audio is routed through the car stereo speakers, taking away the need to install a separate speaker in the passenger foot well, which can often lead to muffled or distorted sounds – especially at higher speeds. The volume of the call can be adjusted through your stereo controls or steering wheel audio controls (if fitted to your vehicle).

Intelli-Mute wiring Diagram

The Intelli-Mute is a three way lead, one end connects to your existing vehicle wiring, one to the Intelli-Mute control box and the third connects to the back of your car stereo. You will need to make sure that the Intelli-Mute that you order is the correct one for your stereo. If you are not sure what connection type your stereo has, please contact your local car dealership or stereo manufacturer. To complete the installation, you will also need an Accessory Harness specific to your Car Kit.

Elan Accessory Harness

Elan Accessory Harness: What are they and why do I need one?

The Accessory Harness is the lead that connects your Intelli-Mute control box to your Car Kit. As each type of Car Kit is different, they have harnesses specific to each type and have to be ordered separately. They are really simple to fit, one end connects to the Intelli-Mute control box, and the other end to the power and speaker connections of your Car Kit. Depending on your vehicle and the amount of space in your dashboard, the Intelli-Mute and harness are designed to sit behind your car stereo. If there isn’t room, the cables are long enough for you to be able to feed from behind the dashboard where there is more space. All you will need to do then is position the microphone (and display screen if present) and feed the cables through to the Car Kit control box.

What else might I need?

Brodit produce a range of in car accessories to help make using your phone in the car easy and safe.

Brodit ProClips

ProClips are brackets that clip securely to your dashboard, giving you a firm, flat surface that you can screw your chosen phone holder on to. When it comes time to change your car or remove the kit, the bracket can be removed easily, leaving no damage to your dashboard.

Brodit Car Holders

Brodit also make two types of in car holder, Active and Passive. Active holders have a charger built in to them which plugs in to your cigarette lighter. Passive holders will hold your phone securely and allow you to use your own charger. Both holders are normally available with a fixed or tilt/swivel base.

Car Chargers

Using Bluetooth car kits and headsets can sometimes increase the drain on the battery, and as most modern Car Kits don’t have a physical connection to your phone, its always a good idea to have a car charger.

If you don’t want the hassle of installing the Car Kit and all extra accessories, Mobile Fun now offer a fitting service for your car kit. Standard Installation includes a fully trained engineer installing the kit at your home or work address. Premium Installation includes the home visit, but also includes an Intelli-mute and Brodit ProClip for your vehicle (Car kit dependant).

To begin pairing:

• Turn on Bluetooth on your mobile device and make sure it is set to discoverable/visible/find me.
• Right click the Bluetooth icon in the system tray next to the clock.
• On the pop up menu that appears select add bluetooth device.
• Follow on screen prompts to search for devices.
• Select your phone from the list of discovered devices.
• When prompted for a PIN number, enter 0000 unless one is provided for you.
• On your handset accept the pairing request and enter the same PIN number as entered on the PC.

Windows will then check your device and install any drivers that are needed for your phone and computer to work together. While Windows is installing drivers for your phone, you may see some yellow notification bubbles by the clock, keep an eye on these as your response may be required to authorise access to your PC.

You may be asked for the driver disc that came with your mobile phone. If you don’t have the disc, download drivers and software from the manufacturers website.