Brodit are the leading manufacturer of in car cradles, making a wide range of holders that are specific to your phone to make sure that it’s held securely in place in your car. You’ll notice from the product listings that there are two types available – Active and Passive, and that there are a couple of mounting options too. This quick guide will explain the difference between the different types of Brodit Holder.
Passive Holders: Passive Holders are a standard straight forward holder for your phone. They are moulded to the shape of your handset and are secured to your car using the self adhesive pads or by screwing into your dashboard.
Active Holders: Active Holders are the same as the Passive Holders, but include a car charger or have one built in. The charger type will vary by phone, but the holder will generally have a moulding to hold the charging tip in place. On most phones you can simply slide your phone into the cradle and the charger should connect straight away, others may need you to manually insert the charging tip into the phone (normally where the charging port is on the side).
Tilt Swivel: Tilt swivel refers to the type of mounting plate fitted to the holder. Brodit holders without the Tilt Swivel will sit flat against the dashboard/ProClip and is not adjustable, so once its in place, its not moving. Tilt Swivel devices give you more flexibilty on how the phone is positioned in the car. They can be rotated through 360 degrees and can be adjusted in all directions to improve visibility and to reduce reflections from bright light. Tilt Swivel mounts are ideal if your phone has a landscape view and is used for Sat Nav & Media playback.
Mobile Phone holders get handled a lot and can become loose over time, especially if they are mounted with the adhesive pads. Although the adhesive pads are quite strong, we’d recommend using a screw fixing to reduce the risk of it falling off your dashboard. If you don’t want to screw into your dashboard, you can purchase a Brodit ProClip.
Brodit ProClips are special brackets that are designed to attach to your dashboard without the need for drilling holes. They normally clip into your dashboard between fascia panels or sit at the side of your stereo. ProClips provide a flat solid surface for you to screw your car holder to and are available for almost all vehicles. We stock a wide range of Brodit ProClips, but if your vehicle isn’t listed, please request it and we’ll order one in for you.
One of the biggest accessory purchases you can make for your mobile phone is to buy and install a fitted Car Kit. While each kit has its own features and benefits, there are a number of extras that you can purchase to help you get the most out of your Car Kit.
Elan Intelli-Mutes: What are they and why do I need one?
The Intelli-Mute from Elan is designed to install your Car Kit quickly and hassle free. Instead of hardwiring your Car Kit into the vehicle’s power supply, the Intelli-Mute allows your Car Kit to be powered using your car stereo. All call audio is routed through the car stereo speakers, taking away the need to install a separate speaker in the passenger foot well, which can often lead to muffled or distorted sounds – especially at higher speeds. The volume of the call can be adjusted through your stereo controls or steering wheel audio controls (if fitted to your vehicle).
Intelli-Mute wiring Diagram
The Intelli-Mute is a three way lead, one end connects to your existing vehicle wiring, one to the Intelli-Mute control box and the third connects to the back of your car stereo. You will need to make sure that the Intelli-Mute that you order is the correct one for your stereo. If you are not sure what connection type your stereo has, please contact your local car dealership or stereo manufacturer. To complete the installation, you will also need an Accessory Harness specific to your Car Kit.
Elan Accessory Harness
Elan Accessory Harness: What are they and why do I need one?
The Accessory Harness is the lead that connects your Intelli-Mute control box to your Car Kit. As each type of Car Kit is different, they have harnesses specific to each type and have to be ordered separately. They are really simple to fit, one end connects to the Intelli-Mute control box, and the other end to the power and speaker connections of your Car Kit. Depending on your vehicle and the amount of space in your dashboard, the Intelli-Mute and harness are designed to sit behind your car stereo. If there isn’t room, the cables are long enough for you to be able to feed from behind the dashboard where there is more space. All you will need to do then is position the microphone (and display screen if present) and feed the cables through to the Car Kit control box.
What else might I need?
Brodit produce a range of in car accessories to help make using your phone in the car easy and safe.
ProClips are brackets that clip securely to your dashboard, giving you a firm, flat surface that you can screw your chosen phone holder on to. When it comes time to change your car or remove the kit, the bracket can be removed easily, leaving no damage to your dashboard.
Brodit Car Holders
Brodit also make two types of in car holder, Active and Passive. Active holders have a charger built in to them which plugs in to your cigarette lighter. Passive holders will hold your phone securely and allow you to use your own charger. Both holders are normally available with a fixed or tilt/swivel base.
Using Bluetooth car kits and headsets can sometimes increase the drain on the battery, and as most modern Car Kits don’t have a physical connection to your phone, its always a good idea to have a car charger.
If you don’t want the hassle of installing the Car Kit and all extra accessories, Mobile Fun now offer a fitting service for your car kit. Standard Installation includes a fully trained engineer installing the kit at your home or work address. Premium Installation includes the home visit, but also includes an Intelli-mute and Brodit ProClip for your vehicle (Car kit dependant).
All Krusell cases fitted with a Multidapt have a range of interchangeable fitting options available, including for belt, car, bike and pocket. Simply unclip and clip without ever having to change or remove the case. The patented Multidapt system is the key. Having the Multidapt “female” on a Krusell case enables endless possibilities on how to carry a device. All Multidapt accessories are made of stainless steel or nearly unbreakable fibre plastic.
For a better understanding of how Multidapt works, here’s a quick video that Krusell have put together.
What Fitting Options are Available?
Leather Swivel Kit
The perfect accessory for those needing a hard wearing belt clip. The Leather Swivel Kit will safely attach to a belt to provide a secure holding. It is designed to fit standard 45mm belts and available individually or as part of the Executive Pack.
Mount your mobile phone or MP3 player onto your bag strap. Have easy access to your phone for calls, or your MP3 player to control your music. Available only as part of the Executive Pack.
Vortex Clip A full 360 degree rotating clip, which can be adjusted at 45 degree angles. The curved shape of the clip provides an extra secure fitting when attached to a belt. Available as part of the Executive Pack.
Mini Clip A low profile belt clip that allows convenient carrying of your device on your trouser or jacket pocket. Available individually or as part of the Mobility Pack.
Car Holdic Kit Designed to hold your mobile device in the car, simply mount the Car Hold Kit to your vehicles and slide in the Krusell case. Each Car Hold Kit can be mounted with the supplied adhesive tape or a dashboard screw. Available individually or as part of the Mobility Pack or Security Pack.
Slide Swivel Kit An easy and comfortable way to carry your mobile device. Simply attach to your belt and slide your Krusell case into the Slide Swivel Kit. Each Slide Swivel Kit allows full 360 degree movement. Available individually or as part of the Security Pack and Mobility Pack.
A must for both in-and-outdoor activities. Attach any Krusell Multidapt case to the Arm Strap and go. The secure fitting keeps your mobile device or MP3 player close to hand whilst being active. Available individually or as part of the Sports Pack.
Steel Swivel Kit
The ideal accessory for heavy duty professions. The Steel Swivel kit is designed to endure intense pressure, ideal for those working in rough environments. Designed to fit standard 45mm belts. Available as part of the Security Pack.
Ideal for keeping keys, MP3-players, etc within easy access. The high tension wire keeps yours accessories and phone at the right length for whenever you need it. Available individually and as part of the Security Pack.
The QuickMounter is used to mount phones or PDAs in your car, boat or on any other surface. Anything that sticks to a magnet can be attached. A metal plate is secured to your phone, and the Quickfix holder is mounted by adhesive tape.
The SpringClip represents Krusell’s standard clip for mobile phones. The SpringClip is perfect for anyone who switches back and forth from a small pocket to larger belt. The spring in the clip keeps it secure in any situation.
Convenient to use! Mount mobile phones, GPS and PDAs according to your requirements to windshields and windows of any kind.
Ratchet Swivel Kit
A swivel that rotates around its own axis, this Ratchet Swivelkit is something for the fastidious user, who wants the best and most user friendly holder available on the market. Stops in 8 different positions when rotating the 360°.
With the Phoneholdic kit you can carry your device in a Multidapt® way without using a case. Mounted by adhesive tape to your phone.
The BigClip is the more robust and slightly thicker alternative to the MiniClip and therefore suitable for both larger phones and belts.
Fitting your Krusell Case
Fitting your case to your new phone is very straight forward, simply slide your phone in and fasten the case to keep it secure. If you have a slide phone, such as the Nokia N95, you need to make sure that only the keypad is inserted into the plastic pouch and that the plastic sits flat against the keypad in order for the phone to close. The following video shows how to fit the case correctly.
Step 1: Wipe the screen with a lint-free cloth to remove dust and contaminants.
Step 2: Carefully peel off the protector skin by lifting the edges. Take care not to leave any finger prints on the protector surface.
Step 3: Carefully position the protector over the surface of your phone. When the protector is lined up correctly, gently lay down the protector onto the screen of your phone.
Step 4 : Use a bank card and gently push any remaining air bubbles out to the sides of the screen.
Removal: Remove the screen protector by using sellotape. Place the sellotape about an inch on one corner of screen protector firmly.Hold the other end of the tape and slowly lift it up
Cleaning : Wash the screen protector by dipping it in water or holding it under a tap. Dry it by using hair dryer. Alternatively, please use sellotape to pull the dust, lint, or contaminates, off of the screen protector.
Got the latest must have phone? Then you’ll need the latest must have accessories to go with it!
Here are Mobile Fun’s top five accessories for your Apple iPhone:
InvisibleSHIELD Full Body Protector – Apple iPhone
The last thing you’ll want to do to your new phone is scratch it. Not only does it look bad, but can spoil your enjoyment while looking at photo’s, movies and coverflow. InvisibleShield full Body Protectors provide exceptionally clear protection that helps prevent impact damage from keys, coins & pens to both the front and back of your iPhone.
Jawbone 2 Bluetooth Headset
If you have used Bluetooth Headsets in the past, I’m sure you will have experienced times where people can’t hear a word you’re saying because of what’s going on around you, whether you’re in a Pub or Club, cruising down the motorway or in a noisy environment at work. Jawbone Bluetooth headsets incorporate the latest technology in noise cancellation meaning you will be heard no matter what is going on around you.
i-Power iPhone Mains Charger
Charging your phone through the USB cable connected to your PC or Mac isn’t always possible – especially if you’re away on holiday, or frequently away with work. This Mains Charger allows you to charge your iPhone without the need to dock it.
Apple iPhone Krusell Orbit Premium Leather Case
The Apple iPhone is a stylish phone, it needs a stylish case to go with it. The Krusell Leather case is extremely stylish and practical. Krusell have a range of connectors available too, so you can mount it on your belt, in the car or even on your bike, without having to remove it from its case. The Orbit Premium Leather Case features a built in stand to make reading your emails and accessing the Internet even easier.
Apple iPhone Stereo Handsfree Adapter
Listen to your MP3 music in full stereo with your own headphones on your iPhone. This adapter allows you to connect any headset with a 3.5 mm jack plug fitting to your iPhone. Built in controls also let you answer and end calls, as well as adjust volume levels and play/pause your music.
"I came across Mobile Fun a few years ago searching the web for phone accessories. They have a huge range with keen prices and are now my 'go-to' source of kit for my mobiles whenever I get a new one. Their service is always fast (my last order was placed early evening on one day and delivered mid morning the next). The site is easy to navigate and the reviews are very useful. Recommended."
Keith C says…
"Excellent site good products fast service cannot fault them...."
"First time user of MobileFun. Excellent! Many thanks. "
Diana B says…
"Fantastic co. Fast delivery and super products I ordered a Samsung battery for my Samsung galaxy S2 and was great after buying cheap batteries which did not work Thanks I will order again"
West Kirby Wirral
Roy P says…
"I would just like to say a big "thanks" for the efficient way you dealt with order. I purchased a hybrid silver case for my iPhone 5cthe quality is excellent. I am well pleased. Forget the cheap versions and go for this."