Mobile Fun Blog

Mobile Fun on BBC’s Click

Monday, July 14th, 2008

Check out our very own Andy Simpson on the BBC’s Flagship technology programme, Click.

[youtube:http://www.youtube.com/watch?v=xRjswbUDrpk]

Watch Andy Simpson on BBC’s Click

Andy talks to Spencer Kelly about the Samsung D880 DuoS – Twin Sim Phone and the new range of green, eco-friendly chargers by Xqisit, currently available for Nokia and Sony Ericsson handsets.

(No Ratings Yet)

 Loading ...

How to install your Bluetooth Dongle

Tuesday, June 17th, 2008

Installing a Bluetooth Dongle to a PC Running Windows XP SP2:

Windows XP Service Pack 2 has generic Bluetooth drivers built into the operating system. While these drivers will provide you with basic Bluetooth functionality, you will only get the most out of your Dongle by installing the drivers that are supplied with it.

Installing generic Windows drivers:

Before beginning installation we would recommend that you visit the Microsoft Windows Update web site, to make sure your PC is up to date with the latest driver and security updates. Bluetooth drivers are built into Windows XP Service Pack 2 so an installation CD is not necessarily required.
To begin installation, insert the Bluetooth Dongle to a free USB port on your computer.

After a few seconds, you should see a yellow notification bubble by the clock. Windows will automatically begin to search for the necessary drivers and after a few minutes, the hardware will be installed and ready for use.

If Windows doesn’t have the necessary drivers, the add new hardware wizard will prompt you to insert the disc.

If this happens;

• Place the disk into the CD drive.
• Click next.
• Follow the on screen prompts to install the drivers.
• Restart the computer.

Your new Bluetooth Dongle is ready for use.

Installing specific drivers using supplied disc:
To install the drivers that are supplied with your new Dongle, follow these steps.

It is very important that you do not plug the Dongle into your computer until prompted to do so.

• Insert the CD into your CD drive.
• Disc should run automatically.
• Follow the on screen prompts.
• Insert the Dongle when prompted.

A series of yellow notification bubbles will appear by the clock as the drivers are installed. When installation is complete you will get a notification to say that the hardware has been successfully installed and is ready for use.

Installing Specific Drivers using downloaded drivers:
If you don’t have the software disc anymore or it has been damaged, you can download the drivers from the internet. The drivers needed vary from device to device. Download Bluetooth Dongle drivers. Once you have downloaded the file. Double click the Icon to begin the setup process. Follow the on screen prompts, and only insert the Dongle when prompted to do so. A series of yellow notification bubbles will appear by the clock as the drivers are installed. When installation is complete you will get a notification to say that the hardware has been successfully installed and is ready for use.

(3 votes, average: 4.33 out of 5)

 Loading ...

How to set up Sat Nav on your Windows based Smartphone

Tuesday, June 17th, 2008

To set up your Windows Mobile device to work with most Satellite Navigation applications you will first need to configure your Bluetooth GPS Receiver.

Windows Mobile 5.0

• To start the set up, launch the "Bluetooth Manager" on your device. To do this tap Settings > Connections > Bluetooth on the start menu
• On the Bluetooth options screen you need to turn on bluetooth and make sure that your device is discoverable.
• Click on the devices tab at the bottom of the screen and then select new partnership. Your device will now search for your GPS receiver.
• Once the search has completed, select the GPS device you wish to use, You will then be prompted to enter the passkey. This is usually 0000, but varies from device to device, so keep your instruction manual for your GPS receiver close to hand.
• The next screen will ask you to select the services you wish to use with this device.
• Tick the box next to serial port and then click on finish.
• Now click on the "com ports" tab at the bottom of the screen, you will have two options here, new incoming port and new outgoing port. You need to select new outgoing port.
• On the next screen you will need to select the GPS device that you have just added and press next.
• You now need to choose a com port from the drop down list and press finish. Make a note of the com port number that you have assigned to the GPS receiver as you may need this later on in the set up process.

Your GPS is now set up to talk to your handheld device. You may need to change a few more settings depending on the software you are using. If you are unsure consult your user guide.

Tom Tom Navigator

To use TomTom Navigator you will need to tell the software which GPS receiver to use.

• Launch the application and then go to the preferences screen. Click on the Show GPS Status screen.
• Click on configure and scroll through to select "Other Bluetooth GPS", this brings up a list of all the available connections on your device.
• You need to select the com port you assigned to the GPS receiver earlier on in the set up process. If you can’t see the full name of the port, tap and hold the name to reveal it.
• You will know that your GPS is correctly configured when you see the UTC time in the top right corner and you get a black and yellow spinning icon.

If for any reason the icon isn’t spinning and you can’t pick up a GPS signal, there is an alternative set up option you can try:

• Click again on the configure button, and this time scroll through and select "Other Cable NMEA GPS" (Don’t worry about the name, we’ll tell it to use Bluetooth later on)
• Select the baud rate, if you are unsure set the rate to 4800.
• You should now see the same list of available ports that we saw earlier on. Select the appropriate one for your GPS receiver, remember you can tap and hold the name of the port to see its name in full.
• You should now see the yellow and black icon spinning on the screen.

If this still hasn’t worked then you may need to contact TomTom technical support for more advanced help.

(1 votes, average: 5.00 out of 5)

 Loading ...

How to use your Bluetooth Headset with Skype

Tuesday, June 17th, 2008

To use your Bluetooth headset with VOIP programs such as Skype, you will need to pair your headset with your PC, authorise it to access Skype, and then configure Skype to use Bluetooth audio devices. The process is fairly straight forward, but varies slightly depending on the dongle and driver that you are using.

The steps below assume that you have installed the software that came on the CD with your Bluetooth Dongle, not the generic Windows drivers, and that Skype is already installed on your PC running Windows XP SP2.

To determine which Bluetooth drivers you are using, you will need to access Device Manager. To do this, press the "Windows" and "Pause Break" keys on the keypad simultaneously. This will then open System Properties. Click on the Hardware tab, and then you will see a button to launch Device Manager – click it. This will then open a new window listing all devices connected to your computer. Towards the top of this list you will see Bluetooth Devices, click the plus sign to expand the list. The top line should say Bluetooth Enumerator, the second line will tell you which driver you are using and will be either Broadcom/Widcomm, Toshiba, or BlueSoleil. Make a note of your driver manufacturer and close all windows. If you see Microsoft listed, it means you have the generic Windows drivers installed, and probably won’t work with Skype unless you update the drivers. For information on how to do this, read our post on updating your Bluetooth drivers.

Please note that drivers are specific to the dongle you are using, and you can only use the driver manufacturer that is supplied with your dongle. You cannot, for example, use a Toshiba driver with a BlueSoleil supported dongle.

Broadcom / Widcomm – Skype Compatibility Rating 5/5

• If you have already paired your headset with your PC, delete the pairing.
• Right click the Bluetooth icon by the clock and select add a bluetooth device. This will then launch a wizard to guide you through the pairing process.
• The wizard will search for available devices, select the headset you want to use and click on next.
• The next screen will ask you to confirm the services you want to use. Mono Bluetooth Headsets will list only Hands-Free Unit, Stereo Bluetooth Headsets will also list Stereo Audio.
• Ensure all boxes are ticked and then click next.
• Click OK on the pop up and then click finish on the confirmation screen. You may then see a further pop up confirmation message. Click ok.
• The next screen will ask you to confirm the type of headset. Regardless of your headset, select personal handsfree device with no display.
• You will then be asked to confirm what applications the headset will primarily be used for. Make sure Skype is ticked – click next,
• Now switch over to Skype, you should see a pop up alert by the clock asking you to allow a program to access Skype, you need to allow this add on.
• Once you’ve allowed it you’ll see a message at top of the Skype window.
• Click on the BTSTAC~1.exe file name, then on the pop up screen make sure that the check box next to "allow this program to access Skype" is ticked,
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth".
• Check the "Ring PC Speaker" box if you want incoming calls to ring through the PC speakers as well as ring in the Bluetooth Headset then click on save,
• Make a test call. There may be a brief delay when it connects initially, but you should then be able to hear and talk through your Bluetooth headset.

Toshiba Drivers – Skype Compatibility Rating 4/5

• If you have already paired your headset with your PC, delete the pairing. You can do this through the Toshiba Bluetooth Control panel.
• You’ll see the name of your Bluetooth headset, and three buttons underneath – new connection, detail and delete. Make sure the headset is disconnected and then click delete.
• Launch Skype.
• Go back to your Bluetooth control panel and click on new connection.
• On the wizard that appears, you need to select CUSTOM mode.
• Turn your headset on and put it into pairing mode then press next. Your PC will then search for Bluetooth devices in range, if it doesn’t find your headset on the first scan, click refresh to do another search.
• Select your headset from the list of discovered devices and click next.
• On the next screen you may be prompted to select the type of device you wish to connect. You should see two or three options – Audio Sink, Handsfree, Headset. (Audio Sink may only show up if you are using a stereo headset.)
  You need to select Handsfree on this screen and click next.
• You will now be prompted to enter Pin or Passkey, this can be found in your user guide.
• The next screen you see should ask you if you want to use this in cooperation with a VOIP application. You need to make sure that this box is ticked. If its not, you won’t be able to use it with Skype.
• On the final screen you will be given the option to rename your headset and place a shortcut to the connection on the desktop.
• Click finish.
• Now switch over to Skype, you should see a pop up alert by the clock asking you to allow a program to access Skype, you need to allow this add on.
• Once you’ve confirmed it you’ll see a brief confirmation message in the main Skype window.
• Click on this message and make sure that the check box next to "allow this program to access Skype" is ticked.
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth wave" – Click on save.
• Make a test call. There may be a brief delay when it connects initially, but you should then be able to hear and talk through your Bluetooth headset.

BlueSoleil – Skype Compatibility Rating 2/5

BlueSoleil drivers aren’t the best for working with Skype. The latest version of the drivers, 5.0.5, doesn’t support VOIP services such as Skype unless you pay for an upgrade. You can download version 3.2.2.8 from the BlueSoleil web site which does support VOIP at no extra cost, but I found it to be more difficult to use than Toshiba and Broadcom. The following guide is based on Software version 3.2.2.8.

• Pair your Bluetooth Headset to your PC as normal and then launch Skype.
• To begin setting up Skype, click on Start -> All Programs -> IVT BlueSoleil -> BlueSoleil VOIP Plug In.
• After a few seconds you should see a pop up notification by the clock asking to allow access to Skype, you need to allow this add on.
• Once you’ve clicked on it you’ll see a message at top of the Skype window.
• Click on the .exe file name.
• On the pop up screen make sure that the check box next to "allow this program to access Skype" is ticked.
• Connect to headset, (either by pressing call button on headset, or by right clicking on the headset icon in the bluetooth control panel and selecting connect.)
• In Skype, go to Tools, Options and select Audio Settings. For each of the 3 drop down boxes select "Bluetooth SCO" – Click on save.
• In some cases, "Bluetooth SCO" may not work, in which case set these to Bluetooth AV.
• Make a test call. BlueSoleil is a little slow, and you will find that your call initially is played through your PC, but will be transferred to the headset after a few seconds.

(2 votes, average: 5.00 out of 5)

 Loading ...

How to pair your Phone and PC

Tuesday, June 17th, 2008

Before you can begin using programs such as Nokia PC Suite, you will need to pair your handset with your computer.

To begin pairing:

• Turn on Bluetooth on your mobile device and make sure it is set to discoverable/visible/find me.
• Right click the Bluetooth icon in the system tray next to the clock.
• On the pop up menu that appears select add bluetooth device.
• Follow on screen prompts to search for devices.
• Select your phone from the list of discovered devices.
• When prompted for a PIN number, enter 0000 unless one is provided for you.
• On your handset accept the pairing request and enter the same PIN number as entered on the PC.

Windows will then check your device and install any drivers that are needed for your phone and computer to work together. While Windows is installing drivers for your phone, you may see some yellow notification bubbles by the clock, keep an eye on these as your response may be required to authorise access to your PC.

You may be asked for the driver disc that came with your mobile phone. If you don’t have the disc, download drivers and software from the manufacturers website.

(2 votes, average: 4.00 out of 5)

 Loading ...