InvisibleSHIELD Full Body Protector - HTC Touch HD

I carefully cleaned the device and attempted to fit the protective film as instructed. After approx 30 minutes spent on the battery cover trying to align the section perfectly and adhere the film to the sides / edges properly was quite frustrated. I must admit I then rushed the application of the screen cover (the most important part)and managed to trap tiny air bubbles between the phone and protective film. I tried to peel the screen of and try again, however it was to well stuck down by then, so I tried in vain to slowly push the very tiny bubble out towards the edges of screen. After another 30 minutes or so, I was so unimpressed with the end result, I ripped all the film off and threw it in the bin. Bugger! I recommend using a simple screen protector. Or start will the screen, in case you get wound up as I did.

I had the misfortune of trying a cheaper version and had to send it back. I replaced it with the Invisible Shield and have not looked back since. When installing for the first time, there are Utube videos if you want to see someone else install it first (Gain a bit of confidence before YOU try it!!) and those really helped me. I did make a minor error on my screen guard (of all places!!) where a cut out wasn’t quite cut free and when attempting to remove it, the cut out flap secured itself to the sticky side of the guard and left a mark....I think I temporarily gained Tourette syndrome until I got it free (!!) and of course now I have a minor mark on the top of my screen...BUT...when you see how good the finish is, you'll understand why I say, TAKE YOUR TIME...make sure all parts are free and be careful removing them..It’s worth it!

I've just bought and installed Invisible Shield on my Touch HD. The new design has 8 pieces(screen,battery cover,camera bezel,mini USB on bottom and 4 edges around screen). I rushed mine (1/2 hour)and I've been left with two small air bubbles on battery cover. A plus point IMO is the battery cover now has a black sheen to match the edges around the screen. At first the screen feels slightly "tacky" but after three days is wearing off and now feels right. Screen response has not been affected. I would recommend anyone with a Touch HD give this product serious thought. I would certainly buy another no question

Having used the sheield on numerous mobiles my 1st thought was to by this for the HTC. The pack contains 4 pieces. The problem realy arises when you place the film around the edges and especially on the touch screen. It looks terrible a total flawed design. The screen film need just to cover the screen but Invisheild have tried incorperating flaps to cover the edges which doesnt really work. Its a shame as on all my other mobiles the design and the finish have been 1st rate. I dont recommend this film for this device.

I did install one on my Touch HD, I have to say its fantastic stuff, take a time and be patient when you installing the shield for me it took 1 and half hour. None of phones function will be affected, I loved it.

Comes in 4 pieces - front, battery cover, lower rear and rear camera bezel. Easy to apply - check the website instructional video first - http://www.zagg.com/company/application_instructions.php , But when the Touch HD has, say a white screen, it's very noticable that there are fine vertical lines within the film (from the film manufacture process?) causing a 'polarised' lens type effect and also blurs the definition of the Touch HD screen. The film is not as smooth as the Touch HD screen or original screen protector so swipe moves need to made much more carefully. Dust collects and sticks to the film edge and is more difficult to clean if there was no film making the Touch HD seem 'old' and not just out of the box. After over a week of trying to become accustomed to the lines/bluriness/swipe action/non-pristine look, I've now removed the film - any glue left is easily rubbed off. I'm disappointed with the product and on my experience can not recommend this on a Touch HD.

One came in the box with the phone. Works well but be sure to avoid finger grease on the tacky side else it'll not adhere. Apply in a dust free environment too - 3000ft up a mountainside with clear air is best.