Martin Fields Screen Protector - Nokia N73

I fitted the protector set to a new N73 case which includes a new transparent cover over the glass display so it was probably easier to fit that to a used display. However the trick to fitting this product successfully is to work in a non dusty environment and to not wash the screen, but to clean the display and the protector with a good quality sellotape such as Sellotape Diamond Clear. Apply the tape, then pull it off. Repeat until every last speck of dust is gone. Then apply several strips of tape in columns (2 for the N73) to both the screen and protector until the screen is covered. Leave an extra inch at either end to help pull it off later. When you are ready to fit the protector, quickly pull the tape off both the screen and the protector and apply the protector to the screen - starting from a corner. Don't ever touch the underside of the protector - use a knife blade if necessary. With all dust removed, I had no problems with bubbles (I did before I found the sellotape trick - small particles of dust were holding the protector off the screen). Excellent product.

Great idea, lovely little bit of thin plastic, exact size for phone. But, I ended up throwing mine in the bin. Time and time again I stuck it on, air bubbles woul dnot move. Washed it, dried it, applied it, still the bubbles. So, if you have more patience than me, then guess this is a great product, but otherwise, it will go straight into the recycling bin.